## Fibonacci Numbers

### July 30, 2010

One of the first functions taught to programmers who are just learning about recursion is the function to compute the fibonacci numbers. The naive function takes exponential time, as each recursive call must compute the values of smaller fibonacci numbers, so programmers are next taught how to remove the recursion by explicitly storing state information, giving a linear-time iterative algorithm. The upshot is that programming students are left with the impression that recursion is bad and iteration is good.

It is actually possible to improve the performance with a logarithmic-time algorithm. Consider the matrices

$m = \begin{pmatrix} 1 & 1 \\ 1 & 0 \end{pmatrix}, m^2 = \begin{pmatrix} 2 & 1 \\ 1 & 1 \end{pmatrix}, m^3 = \begin{pmatrix} 3 & 2 \\ 2 & 1 \end{pmatrix}, m^4 = \begin{pmatrix} 5 & 3 \\ 3 & 2 \end{pmatrix}, m^5 = \begin{pmatrix} 8 & 5 \\ 5 & 3 \end{pmatrix}.$

Each time the matrix is multiplied by itself, the number in the lower left-hand corner is the next fibonacci number; for instance, F4=3 (F0=0 is a special case). Of course, powering can be done using a binary square-and-multiply algorithm, as in the ipow and expm functions of the Standard Prelude, giving a logarithmic algorithm for computing the nth fibonacci number.

Your task is to write the three fibonacci functions — exponential, linear, and logarithmic — described above. When you are finished, you are welcome to read or run a suggested solution, or to post your own solution or discuss the exercise in the comments below.

About these ads

Pages: 1 2

### 17 Responses to “Fibonacci Numbers”

1. [...] Praxis – Fibonacci Numbers By Remco Niemeijer In today’s Programming Praxis we have to provide three different methods of calculating the ever-popular [...]

2. Remco Niemeijer said

My Haskell solution (see http://bonsaicode.wordpress.com/2010/07/30/programming-praxis-fibonacci-numbers/ for a version with comments):

import Data.List

fibexp :: Int -> Integer
fibexp 0 = 0
fibexp 1 = 1
fibexp n = fibexp (n - 1) + fibexp (n - 2)

fiblin :: Int -> Integer
fiblin n = fibs !! n where fibs = 0:1:zipWith (+) fibs (tail fibs)

mult :: Num a => [[a]] -> [[a]] -> [[a]]
mult a b = [map (sum . zipWith (*) r) $transpose b | r <- a] matrixpower :: [[Integer]] -> Int -> [[Integer]] matrixpower m 1 = m matrixpower m n = (if even n then id else mult m)$
matrixpower (mult m m) (div n 2)

fiblog :: Int -> Integer
fiblog 0 = 0
fiblog n = matrixpower [[1,1],[1,0]] n !! 1 !! 0

3. Graham said

I cheated a bit to get the logic of my matrix_mul and matrix_pow right, looking at Remco’s very clean answer and some other sources (I haven’t had coffee yet today…)

Here’s an inelegant Python implementation; apologies for the ugly matrix_mul definition.

def fib_exp(n):
if n < 2:
return 1
else:
return fib_exp(n-1) + fib_exp(n-2)

def fib_lin(n):
c = n
a, b = 1, 1
while c > 0:
a, b, c = b, a + b, c - 1
return a

def matrix_mul(a, b):
return [[a[0][0]*b[0][0]+a[0][1]*b[1][0], a[0][0]*b[0][1]+a[0][1]*b[1][1]],
[a[1][0]*b[0][0]+a[1][1]*b[1][0], a[1][0]*b[0][1]+a[1][1]*b[1][1]]]

def matrix_pow(a, n):
if n == 1:
return a
elif (n % 2):
return matrix_mul(a, matrix_pow(matrix_mul(a, a), n/2))
else:
return matrix_pow(matrix_mul(a, a), n/2)

def fib_log(n):
a = [[1, 1], [1,0]]
return matrix_pow(a, n)[1][0]

4. Graham said

…and also apologies about overindenting the second line of matrix_mul. It didn’t look right in the comment box, but I should have left it alone.

I really appreciate your excellent blog. Please keep up the good work!

5. F. Carr said

Here is a logarithmic version — but using base 3 instead of base 2.

6. F. Carr said

Oops, left off the link to codepad.org.

7. Remco Niemeijer said

Alternative (and, admittedly, slightly hacky, as evidenced by the warnings you get if you don’t specify -fno-warn-missing-methods and -fno-warn-orphans) Haskell solution for the logarithmic version, based on the fact that the default power operator is already logarithmic:

{-# LANGUAGE FlexibleInstances #-}

import Data.List

instance Num a => Num [[a]] where
a * b = [map (sum . zipWith (*) r) \$ transpose b | r <- a]

fiblog :: Int -> Integer
fiblog n = ([[1,1],[1,0]] ^ n) !! 1 !! 0

8. Christopher Oliver said

An alternate scheme implementation with minor bit diddling.

;;; Computation of Fibonacci numbers with F(0) = 0 and F(1) = 1

(define (naive-fib n)
(if (< n 2) n (+ (naive-fib (- n 1)) (naive-fib (- n 2)))))

(define (linear-fib n)
(let loop ((a 0) (b 1) (n n))
(if (< n 1) a (loop b (+ a b) (- n 1)))))

;; The following takes advantage of matrix symmetry and the constant
;; successor term to use cheaper steps for the square and multiply
;; operations.  Note that the matrix square takes Fib n to Fib 2n+1,
;; so the sense of even/odd in the power function is reversed from
;; the usual.
(define (fast-fib n)
(define (successor a b c)
(list (+ a b)
(+ b c)
b))

(define (square a b c)
(let ((b-squared (* b b)))
(list (+ (* a a) b-squared)
(* b (+ a c))
(+ b-squared (* c c)))))

(define (matrix-fib n)
(cond ((= n 1) '(2 1 1))
((even? n) (apply successor (matrix-fib (- n 1))))
(else (apply square (matrix-fib (/ (- n 1) 2))))))

(if (< n 1) 0 (caddr (matrix-fib n))))

9. Christopher Oliver said

And since the m[0,0] = m[1,1]+m[1,0]…

(define (fast-fib n)
(define (successor a b)
(list (+ a b) a))

(define (square a b) \
(list (* a (+ a b b)) (+ (* a a) (* b b))))

(define (matrix-fib n)
(cond ((= n 0) '(1 0))
((even? n) (apply successor (matrix-fib (- n 1))))
(else (apply square (matrix-fib (/ (- n 1) 2))))))

(if (< n 1) 0 (car (matrix-fib (- n 1)))))


That will teach me to proofread.

10. Christopher Oliver said

Err!!! delete that backslash. Praxis needs a way for responders to edit their mistakes!

11. rahul said

please give also solution in c langauge pleaseeeeeeeee.

12. programmingpraxis said

After writing this exercise, I came across Dijkstra’s paper describing a set of recurrence equations that calculate the nth fibonacci number. His method is orthogonal to the matrix method described above, but more convenient for computation. Note that Dijkstra starts the sequence differently; where we say F0=0, Dijkstra says F0=1. Here’s the code:

(define (fib n)   (define (square x) (* x x))   (cond ((zero? n) 0) ((or (= n 1) (= n 2)) 1)         ((even? n) (let* ((n2 (quotient n 2)) (n2-1 (- n2 1)))                      (* (fib n2) (+ (* 2 (fib n2-1)) (fib n2)))))         (else (let* ((n2-1 (quotient n 2)) (n2 (+ n2-1 1)))                 (+ (square (fib n2-1)) (square (fib n2)))))))

13. Gil Martinez said

I’ve seen difference equations (e.g., fibonacci) expressed as matrices before, but this was the first time I’ve seen the concepts of logarithmic-time exponentiation, matrices, and difference equations all in one problem. This was a genuinely entertaining exercise; thanks for posting.

Since the core of this problem was essentially finding a O(log(n)) algorithm for matrix multiplication, I also wrote a O(1) solution based upon diagonalization. Looks like it works, but for very large values, it may suffer from accuracy issues due to the use of inexact numbers.

(define (transpose A)
(apply map list A))

;; crude matrix-mult for 2x2
(define (matrix-mult A B)
(let ((trans-B (transpose B)))
(cons
(list
(apply + (map * (car A) (car trans-B)))
(apply + (map * (car A) (cadr trans-B))))
(list
(list
(apply + (map * (cadr A) (car trans-B)))
(apply + (map * (cadr A) (cadr trans-B)))))
)))

(define (log_fib n)
(cond
((>= 1 n) '((1 1) (1 0)))
((even? n)
(let ((fib-matrix (log_fib (/ n 2))))
(matrix-mult fib-matrix fib-matrix)))
(else
(let ((fib-matrix (log_fib (quotient n 2))))
(matrix-mult
(matrix-mult fib-matrix fib-matrix)
'((1 1) (1 0)))))))

(define (PDP_fib n)
(let* ((eig1 (* 1/2 (+ 1 (sqrt 5))))
(eig2 (* 1/2 (- 1 (sqrt 5))))
(P (list
(list eig1 eig2)
(list 1 1)))
(D (list
(list (expt eig1 n) 0)
(list 0 (expt eig2 n ))))
(P^-1 (let ((det (/ 1 (- eig1 eig2))))
(list (list det (* det eig2 -1))
(list (* det -1) (* det eig1))))))
(round (cadr (car (matrix-mult (matrix-mult P D) P^-1))))))


[ I fixed the formatting. In the future, look at the code formatting how-to for instructions. Thanks for your kind words, and for an interesting variation on the problem. -- PP ]

14. Montag said

public void fibonacci(int firstTerm, int secTerm)
{
if (nextTerm == 75025) return;

nextTerm = firstTerm + secTerm;

System.out.println(counter+”. “+nextTerm);

fibonacci(secTerm, nextTerm);
}

Goes to 25th term, based on firstTerm = 0 and secTerm = 1.

15. treeowl said

Gil Martinez, I think your O(1) approximation is about as honest as the “O(log n)” algorithm we see here. It’s actually impossible to achieve O(log n) time for calculating arbitrarily large Fibonacci numbers: to represent fib(n) requires O(log(fib(n))) bits. But as shown at this site, fib(n)=round(φn / √5), which is Θ(φn), so we need Θ(log(φn))=Θ(n) bits, which we can’t possibly produce in O(log n) time. What I don’t know is whether the naive algorithm is actually O(n) or O(n log n).

16. treeowl said

Those were all supposed to be φ^n. Not sure where that went screwy.

17. treeowl said

I missed something more important: The PDPFib function is defined using (expt eig1 n). I don’t see how that function can possibly be O(1), even assuming that addition, subtraction, multiplication and division are.